1. Product Overview
This third-generation emergency light is equipped with a high-brightness low-attenuation SMD powder glass tube. 99.7% light transmittance, 120-degree beam angle, high luminous efficiency. Copper G13 base: with perfect conductivity and flame retardancy. Emergency time can reach more than 2 hours
2. Product Specification
| Model |
AN-T58SMD16 8E3-14W |
AN-T8SMD168 E3-14W |
AN-T58SMD21 0E3-18W |
AN-T8SMD210 E3-18W |
| Input |
AC100-277V |
|||
| Rated Power |
14W ± 5% |
14W ± 5% |
18W ± 5% |
18W ± 5% |
| Emergency Power | 8~10W optional | 8~10W optional | 8~10W optional | 8~10W optional |
| PF |
PF>0.9@100VAC ; 0.84@277VAC |
|||
| Charging time |
≥24 hours |
|||
| Emergency time |
≥2 hours (Refer to the timetable for optional) |
|||
| Luminous flux (at full
brightness) |
＞1680LM± 5%
|
＞1680LM± 5%
|
＞2160LM± 5%
|
＞2160LM± 5%
|
3. Product Features
● Wide AC input voltage （100-277VAC）
● imported LED chips, high luminous efficiency,power and energy more saver
● A grade ternary lithium battery, 2*2.6Ah～3Ah, 3.7V Ultra-long emergency time limit, minimum level ≥ 2 hours
● Built-in certified emergency power, lifespan, high safety Performance
● With automatic monthly inspection function, fault alarm function, more intelligent
● With emergency test button/indicator/battery power switch, appearance coordination,beautiful and textured
● 6063 aluminum with high thermal conductivity,high temperature resistant PC
● Suitable for warehouses, offices, shopping malls and other places
● Comply with CE and RoHS standards
● 3-year warranty
4. Product Installation
4.1. Before installation, confirm whether the connected voltage, frequency, etc.are consistent with the product parameters
4.2. Ensure that the input voltage and frequency are within the specified range before installation.
4.3. It should be installed by qualified professionals, and ensure that the mains is completely turned off before installation
4.4. When installing, make sure that the "hidden battery switch button" is in the pressed state, and the traffic lights do not flash alternately
4.5. No need for starter and ballast, or please confirm that the above components are disconnected; The lamp connection and installation wiring diagram is divided into TYPE-B and TYPE-C,as shown below
4.6. After installation, please check carefully, and then test it after confirming that it
5. Product Application
This emergency light is suitable for commercial complexes and other public facilities ,Schools, colleges, universities and Places where need energy saving and high color rendering index lighting.
Post time: Jun-03-2023